Introduction of ultrasonic Humidifier
When the air is very dry, our skin will be cracked. At this time, we need to increase the humidity of the air and maintain a moist environment for improvement. A humidifier is the best choice. Ultrasonic humidifiers mainly use high-frequency vibrations, and then through the high-frequency vibrations of the atomizing sheet, the water in the humidifier is thrown away from the water surface to produce elegant water mist to achieve the purpose of air humidification. Generally, humidifiers have the auxiliary function of displaying the humidity of softened water. For the water softener in the humidifier, the hardness of the water passing through the softener should not exceed 100mg/L, and the humidity of the water is regulated in the range of 30%-70%. within. Features Compared with other types of humidification equipment, ultrasonic industrial humidifiers have the following characteristics: 1. High humidification efficiency (close to 100%), high humidification intensity, small and uniform mist particles, and can quickly reach the required relative humidity per unit time, saving water; 2. The energy consumption index per unit of humidification is low. The energy consumption of the ultrasonic humidifier is only 0.05 kW/(kg.h), which is only 1/15~1/10 of other humidification methods, and the daily operating cost is low; 3. It is small in size and can be independently built into a system according to site conditions. It is not only suitable for the installation of new plants, but also can be used to transform and upgrade old plants without destroying the original equipment; 4. Uniform humidification can quickly and large area solve practical problems in industrial production, such as flying, broken ends, static electricity, roughness and fiber fragility in textile production; 5. The atomization component adopts an integrated atomization movement, and the fully sealed structure design achieves the purpose of waterproofing, and the replacement and maintenance of the atomization sheet can be solved immediately on the spot, which completely eliminates the easy damage and short life of the early ultrasonic humidification system And cumbersome maintenance; 6. The integrated atomization movement has its own water protection device, which can effectively ensure that the atomization movement will automatically stop working when the water level is too low. No additional equipment is required, which saves costs; 7. The control method is flexible and convenient. There are three control methods to choose from: switch control, timing control and humidity automatic control. When selecting, flexible selection and matching can be made according to the site environment and personnel arrangements; 8. The humidifier with automatic humidity control is equipped with a humidity sensor imported from France, which has high sensitivity and rapid response, and can completely realize on-site operation without personnel; 9. The equipment adopts stainless steel cabinet, which is beautiful in appearance, corrosion-resistant and long life; 10. The equipment has both fixed bracket type and movable type installation methods, and can be installed in areas far away from the humidification place through pipe connection, which not only facilitates equipment installation, but also improves the efficiency of space use; 11. The equipment has passed the national electrical safety test, equipped with high-performance automatic water supply solenoid valve, overflow and drain, easy to use, safe and reliable; 12. The overall design of the equipment has undergone repeated tests and years of actual testing. It has a compact structure, reasonable collocation, no high-power motor, and is not driven by pure mechanical energy to humidify, so there is no noise during work and a high atomization effect on liquids. The ultrasonic humidifier adopts multiple protections, such as current overload protection, dry burning protection, water temperature protection, etc., which can ensure the continuous and stable operation of the machine for a long time. The whole machine is sprayed with stainless steel material without rust; the fog-making movement adopts an integrated fog-making module, and the main components are imported products to ensure the service life of the humidifier. The humidification speed is fast, and it only takes 1 second for the humidifier to generate the rated humidification volume from a static state.
